Flat Floating Shelf 12x2

Wax Maintenance Packs

To keep your wood looking its best we have Wax Maintenance Packs available.

Our Packs are ideal to fix small damage to shelves or furniture. Wood wax is very easy to repair compare to other wood finishes. In our pack you will find everything you need to repair your wooden furniture from bumps, scratches and knocks that can happen in every home. 

To apply a new coat of wax wipe over the item, ensuring that it is free from dust, then use the cloth to apply a small amount of wax whilst rubbing in the same direction as the grain of the wood. Leave the repaired area to dry for about 15mins. Your shelf now has a new shiny finish. 

Wood Care

* It’s easy to care for your wooden furniture. For any spills or stains use a clean slightly damp cloth to wipe it off. You don’t want the water to sit on the wood so wipe it again with a dry cloth if you have to. Do not use any furniture sprays, kitchen or baby wipes or this can damage your wax finish. 

* Natural wood can be affected by certain environmental changes. Don't worry about any bending or cracks caused by the change of temperature or humidity as this is the natural process that wood could encounter. 

* To keep the wax finish looking brand new for years to come, we recommend applying a clear or colour wax or to the shelves once a year.

Fixings and Installation

You’ll receive all fixings in your packaging. All fixings are especially chosen and designed to fit your furniture. For shelves we recommend fixing them to solid wall types only. We cannot guarantee that the shelves will stay up if you use different fixings to those we provided and if you try to fix them to different wall types. 

We attach assembly instructions with every parcel. 

Decide where to position your shelf. It is important to make sure if the wall is solid or plasterboard. For plasterboard walls try to use timber studs if possible. Locate the drill hole centres by using a tape measure and a spirit level. All our shelves have pre-drilled holes, and the number of holes depends on the shelf's dimensions.

Position the shelf on the wall and use a pencil to draw a level line on the wall. Once you know where your fixing points should be on the wall, drill ø 10mm holes. Insert the wall plug into the wall, slip washer onto the screw thread and screw shelf support into the wall plug.

Install shelf on support. The holes on the shelves are bigger than brackets to allow for adjustment. Using the SW10 Spanner you can adjust the height of the shelf, level the shelf and tighten the fitting. Push the shelf all the way up to the wall.